Units Sold: 45
Free Shipping
Our Pro Dual Network signal booster is a robust solution to connection problems. It will take the signal to full 5 bars, even if the incoming is as weak as 1-3 bars. It can boost 2G and 3G signals over 1000 sq. m. range. The powerful repeater supports 900 MHz and 2100 MHz frequencies, compatible with major UK providers, such as BT, EE, Virgin, T-Mobile etc.
The instructions contained in the installation kit provide a simple step-by-step guide to set up your booster in no time and enjoy a flawless connection. The process does not require special tools, not found in an everyday toolbox. Should you run into an unlikely problem along the way, don’t hesitate to contact our customer support for clarifications. A team of professionals will be at your service, ready to answer your questions 24/7.
We value the time and effort of our customers, so in addition to the free delivery, we offer you a 30-day money-back guarantee, along with a 2-year warranty on all of the products.
How to select the best location is described fully in The installation guide. However, if you still cannot find a good place, you can contact us through chat or by email and we will help you with the setup.
Yes! The standard antenna can accept signal from within 170 degrees. If towers are located on the opposite side of your property than your antenna, you may need to upgrade your system by adding a second antenna so you can receive signal from all locations.
We sell high-quality products which are all capable of simultaneously supporting multiple devices. The limit for each booster mainly depends on its output power or ‘dBs’. We have provided a list of devices and their support limit converted to dBs below:
Estimations can also be made using this table:
Coverage in square metres | Number of supported users |
Up to 150 sq m | Up to 50 users |
Up to 300 sq m | Up to 100 users |
Up to 600 sq m | Up to 150 users |
Up to 1500 sq m | Up to 200 users |
Here’s a simple, quick test to check whether your place is suitable for a signal booster.
The only thing you should do is check your outside signal strength on your mobile phone.
Here’s how to do it:
1. Find the highest point where you could put the outside antenna (generally on the roof).
2. Check how many signal bars you see on your mobile phone’s display while you are at that highest point
3. If you have 0 bars – contact us for help to make sure you’ll get a sufficiently powerful solution.
4. If you are suffering from poor outside signal strength of 1-2 bars, then our powerful booster kit will come to help you to get out of that troublesome situation and provide 5 full constant bars inside. (Of course, you can also use a standard kit with a yagi antenna, but the quantity of bars won’t go higher than 3-4 bars inside.)
5. If your outside signal strength is 3-4 bars, then we recommended you purchase a standard booster kit with a yagi antenna upgrade.
6. In case you have 4-5 bars outside, then no yagi upgrade is required as in this case the standard kit’s power will be sufficient enough to provide you with full 5 bars indoors.
7. Measure your property size to make sure the cable set included in a kit will be enough. We offer extra upgrades to help you have an easy set-up.
This booster is specially designed to work with a poor outdoor signal. We offer a Yagi antenna and more powerful booster included in the kit. The High Power Booster guarantees 5 constant bars inside your property.
You may still upgrade with more internal antennas and extra cable to be able get a signal in all the corners over your home, office or wherever you are using it.
Thank you
WRITE A REVIEW